Application of linear electron Bernstein current drive models in reactor-relevant spherical tokamaks

TY - JOUR

T1 - Application of linear electron Bernstein current drive models in reactor-relevant spherical tokamaks

AU - Biswas, Bodhi

AU - Speirs, David

AU - Freethy, Simon James

AU - Vann, Roddy

N1 - © 2023 The Author(s)

PY - 2023/9/25

Y1 - 2023/9/25

N2 - Electron Bernstein current drive (EBCD) systems in spherical tokamaks are sensitive to plasma and launch conditions, and therefore require large parametric scans to optimise their design. One particular bottleneck in the simulation workflow is quasilinear modelling of current drive efficiency. Linear adjoint models are an attractive alternative, offering a ~1000x speed-up compared to quasilinear codes. While linear models are well-tested and commonly used for electron cyclotron current drive (ECCD), they have seen little use in EBCD modelling. In this work, variants of the linear model are applied to EBCD and compared to quasilinear results in a reactor-relevant plasma, i.e. Spherical Tokamak for Energy Production (STEP). This comparison reveals it is important to accurately model the collision operator and finite Larmor radius effects in the linear model. When done properly, good agreement is found with quasilinear calculations, at least for normalised minor radii $\rho < 0.7$ and at low power densities. The power density threshold for quasilinear effects during EBCD is found to be significantly lower than that of ECCD. This is attributed to the much lower group velocity of the electron Bernstein wave. Thus, the linear model is only valid for EBCD modeling at low power densities (e.g. $\lesssim 1 MW launched EBW power in STEP). This may be satisfied in present-day experimental devices, but certainly not in reactors targeting non-inductive operation.

AB - Electron Bernstein current drive (EBCD) systems in spherical tokamaks are sensitive to plasma and launch conditions, and therefore require large parametric scans to optimise their design. One particular bottleneck in the simulation workflow is quasilinear modelling of current drive efficiency. Linear adjoint models are an attractive alternative, offering a ~1000x speed-up compared to quasilinear codes. While linear models are well-tested and commonly used for electron cyclotron current drive (ECCD), they have seen little use in EBCD modelling. In this work, variants of the linear model are applied to EBCD and compared to quasilinear results in a reactor-relevant plasma, i.e. Spherical Tokamak for Energy Production (STEP). This comparison reveals it is important to accurately model the collision operator and finite Larmor radius effects in the linear model. When done properly, good agreement is found with quasilinear calculations, at least for normalised minor radii $\rho < 0.7$ and at low power densities. The power density threshold for quasilinear effects during EBCD is found to be significantly lower than that of ECCD. This is attributed to the much lower group velocity of the electron Bernstein wave. Thus, the linear model is only valid for EBCD modeling at low power densities (e.g. $\lesssim 1 MW launched EBW power in STEP). This may be satisfied in present-day experimental devices, but certainly not in reactors targeting non-inductive operation.

U2 - 10.1088/1741-4326/acf724

DO - 10.1088/1741-4326/acf724

M3 - Article

SN - 0029-5515

VL - 63

JO - Nuclear Fusion

JF - Nuclear Fusion

IS - 126011

M1 - 126011

ER -