By the same authors

From the same journal

Random lasing in uniform perovskite thin films

Research output: Contribution to journalArticle

Standard

Random lasing in uniform perovskite thin films. / Safdar, Amna; Wang, Yue; Krauss, Thomas F.

In: Optics Express, Vol. 26, No. 2, 22.01.2018, p. A75-A84.

Research output: Contribution to journalArticle

Harvard

Safdar, A, Wang, Y & Krauss, TF 2018, 'Random lasing in uniform perovskite thin films', Optics Express, vol. 26, no. 2, pp. A75-A84. https://doi.org/10.1364/OE.26.000A75

APA

Safdar, A., Wang, Y., & Krauss, T. F. (2018). Random lasing in uniform perovskite thin films. Optics Express, 26(2), A75-A84. https://doi.org/10.1364/OE.26.000A75

Vancouver

Safdar A, Wang Y, Krauss TF. Random lasing in uniform perovskite thin films. Optics Express. 2018 Jan 22;26(2):A75-A84. https://doi.org/10.1364/OE.26.000A75

Author

Safdar, Amna ; Wang, Yue ; Krauss, Thomas F. / Random lasing in uniform perovskite thin films. In: Optics Express. 2018 ; Vol. 26, No. 2. pp. A75-A84.

Bibtex - Download

@article{5eab55912da14ab881a93e796ae1b64a,
title = "Random lasing in uniform perovskite thin films",
abstract = "Following the very promising results obtained by the solar cell community, metal halide perovskite materials are increasingly attracting the attention of other optoelectronics researchers, especially for light emission applications. Lasing with both engineered and self-assembled resonator structures, such as microcrystal networks, has now been successfully observed, with the low cost and the simple solution-based process being a particular attraction. The ultimate in simplicity, however, would be to observe lasing from a continuous thin film, which has not been reported yet. Here, we show random lasing action from such a simple perovskite layer. Our lasers work at room temperature; they are deposited on unpatterned glass substrates and they exhibit a minimum threshold value of 10 µJ/cm2. By carefully controlling the solution processing conditions, we can determine whether random lasing occurs or not, using identical precursors. A rather special feature is that some of the films exhibit single and dual mode lasing action, which is rarely observed in random lasers. Our work fully exploits the simplicity of the solution-based process and thereby adds an important capability into the emerging field of perovskite-based light emitters.",
author = "Amna Safdar and Yue Wang and Krauss, {Thomas F.}",
note = "{\circledC} 2017, Optical Society of America. Uploaded in accordance with the publisher’s self-archiving policy. Further copying may not be permitted; contact the publisher for details.",
year = "2018",
month = "1",
day = "22",
doi = "10.1364/OE.26.000A75",
language = "English",
volume = "26",
pages = "A75--A84",
journal = "Optics Express",
issn = "1094-4087",
publisher = "The Optical Society",
number = "2",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Random lasing in uniform perovskite thin films

AU - Safdar, Amna

AU - Wang, Yue

AU - Krauss, Thomas F.

N1 - © 2017, Optical Society of America. Uploaded in accordance with the publisher’s self-archiving policy. Further copying may not be permitted; contact the publisher for details.

PY - 2018/1/22

Y1 - 2018/1/22

N2 - Following the very promising results obtained by the solar cell community, metal halide perovskite materials are increasingly attracting the attention of other optoelectronics researchers, especially for light emission applications. Lasing with both engineered and self-assembled resonator structures, such as microcrystal networks, has now been successfully observed, with the low cost and the simple solution-based process being a particular attraction. The ultimate in simplicity, however, would be to observe lasing from a continuous thin film, which has not been reported yet. Here, we show random lasing action from such a simple perovskite layer. Our lasers work at room temperature; they are deposited on unpatterned glass substrates and they exhibit a minimum threshold value of 10 µJ/cm2. By carefully controlling the solution processing conditions, we can determine whether random lasing occurs or not, using identical precursors. A rather special feature is that some of the films exhibit single and dual mode lasing action, which is rarely observed in random lasers. Our work fully exploits the simplicity of the solution-based process and thereby adds an important capability into the emerging field of perovskite-based light emitters.

AB - Following the very promising results obtained by the solar cell community, metal halide perovskite materials are increasingly attracting the attention of other optoelectronics researchers, especially for light emission applications. Lasing with both engineered and self-assembled resonator structures, such as microcrystal networks, has now been successfully observed, with the low cost and the simple solution-based process being a particular attraction. The ultimate in simplicity, however, would be to observe lasing from a continuous thin film, which has not been reported yet. Here, we show random lasing action from such a simple perovskite layer. Our lasers work at room temperature; they are deposited on unpatterned glass substrates and they exhibit a minimum threshold value of 10 µJ/cm2. By carefully controlling the solution processing conditions, we can determine whether random lasing occurs or not, using identical precursors. A rather special feature is that some of the films exhibit single and dual mode lasing action, which is rarely observed in random lasers. Our work fully exploits the simplicity of the solution-based process and thereby adds an important capability into the emerging field of perovskite-based light emitters.

UR - http://www.scopus.com/inward/record.url?scp=85040941570&partnerID=8YFLogxK

U2 - 10.1364/OE.26.000A75

DO - 10.1364/OE.26.000A75

M3 - Article

VL - 26

SP - A75-A84

JO - Optics Express

T2 - Optics Express

JF - Optics Express

SN - 1094-4087

IS - 2

ER -