By the same authors

From the same journal

From the same journal

Ultrahigh Numerical Aperture Metalens at Visible Wavelengths

Research output: Contribution to journalArticle

Full text download(s)

Published copy (DOI)

Author(s)

  • Haowen Liang
  • Qiaoling Lin
  • Xiangsheng Xie
  • Qian Sun
  • Yin Wang
  • Lidan Zhou
  • Lin Liu
  • Xiangyang Yu
  • Jianying Zhou
  • Thomas F. Krauss
  • Juntao Li

Department/unit(s)

Publication details

JournalNano Letters
DateAccepted/In press - 14 Jun 2018
DateE-pub ahead of print - 25 Jun 2018
DatePublished (current) - 11 Jul 2018
Issue number7
Volume18
Number of pages7
Pages (from-to)4460-4466
Early online date25/06/18
Original languageEnglish

Abstract

Subwavelength imaging requires the use of high numerical aperture (NA) lenses together with immersion liquids in order to achieve the highest possible resolution. Following exciting recent developments in metasurfaces that have achieved efficient focusing and novel beam-shaping, the race is on to demonstrate ultrahigh-NA metalenses. The highest NA that has been demonstrated so far is NA = 1.1, achieved with a TiO2 metalens and back-immersion. Here, we introduce and demonstrate a metalens with a high NA and high transmission in the visible range, based on crystalline silicon (c-Si). The higher refractive index of silicon compared to TiO2 allows us to push the NA further. The design uses the geometric phase approach also known as the Pancharatnam-Berry (P-B) phase, and we determine the arrangement of nanobricks using a hybrid optimization algorithm (HOA). We demonstrate a metalens with NA = 0.98 in air, a bandwidth (full width at half-maximum, fwhm) of 274 nm, and a focusing efficiency of 67% at 532 nm wavelength, which is close to the transmission performance of a TiO2 metalens. Moreover, and uniquely so, our metalens can be front-immersed into immersion oil and achieve an ultrahigh NA of 1.48 experimentally and 1.73 theoretically, thereby demonstrating the highest NA of any metalens in the visible regime reported to the best of our knowledge. The fabricating process is fully compatible with microelectronic technology and therefore scalable. We envision the front-immersion design to be beneficial for achieving ultrahigh-NA metalenses as well as immersion metalens doublets, thereby pushing metasurfaces into practical applications such as high resolution, low-cost confocal microscopy and achromatic lenses.

Bibliographical note

© 2018 American Chemical Society. This is an author-produced version of the published paper. Uploaded in accordance with the publisher’s self-archiving policy. Further copying may not be permitted; contact the publisher for details

    Research areas

  • crystalline silicon, Dielectric metalens, high numerical aperture, oil immersion

Discover related content

Find related publications, people, projects, datasets and more using interactive charts.

View graph of relations